[cisco-voip] help with debuging calls during SRST

[VoIP Guy]

You are not forwarding any digits to the PRI...

do the following:

conf t
dial-peer voice 91811901 pots
 default forward-digits
end


On Thu, Oct 28, 2010 at 4:13 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> I'm not having any luck debugging calls during SRST mode. What I'm looking
> to find out is:
>
>    - which dial-peer is being hit
>    - all the digits that are being sent out to the PRI (including
>    translations and prefixes)
>    - which PRI is being used
>
> I'm able to get which dial-peer is being hit and the translations, but I
> can't see the digits being sent to the PRI and which PRI is being used. I've
> got a crossover connected so both ports are up, but I don't think it's that,
> I think I'm just not using the right debug statements.
>
> For example, when I hit the dial-peer below. I'd like to see the "BAD#"
> digits being sent to pri 0/0/0.
>
> ------------------------------
> dial-peer voice 91811901 pots
>  corlist outgoing uogdev-block-services-css
>  huntstop
>  preference 2
>  destination-pattern 9[1-8]11
>  clid network-number 5196741500
>  port 0/0/0:23
>  forward-digits 0
>  prefix BAD#
> ------------------------------
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101028/b4b72a9d/attachment.html>