[cisco-voip] help with debuging calls during SRST

[Leslie Meade]

Add this line

 

Forward-digits 3

 

It will drop the 9 and send the rest.. 

 

 

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, October 28, 2010 8:14 AM
To: voyp list
Subject: [cisco-voip] help with debuging calls during SRST

 

I'm not having any luck debugging calls during SRST mode. What I'm looking to find out is:

*	which dial-peer is being hit
*	all the digits that are being sent out to the PRI (including translations and prefixes)
*	which PRI is being used

I'm able to get which dial-peer is being hit and the translations, but I can't see the digits being sent to the PRI and which PRI is being used. I've got a crossover connected so both ports are up, but I don't think it's that, I think I'm just not using the right debug statements.

For example, when I hit the dial-peer below. I'd like to see the "BAD#" digits being sent to pri 0/0/0.

________________________________

dial-peer voice 91811901 pots
 corlist outgoing uogdev-block-services-css
 huntstop
 preference 2
 destination-pattern 9[1-8]11
 clid network-number 5196741500
 port 0/0/0:23
 forward-digits 0
 prefix BAD#

________________________________



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101028/ee48b5b9/attachment.html>