[cisco-voip] h323 or mgcp with fractional pri

[Jason Aarons (US)]

Technically Cisco CallManager never supported MGCP with fractional, however do a Google search for busying out the unused B-Channels in IOS under interface ser0/0/0:23.  I think I also saw reference to some service parameters in callmanager.  I can attest I used that trick many times with no problems.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
Sent: Thursday, October 28, 2010 11:12 AM
To: cisco-voip
Subject: [cisco-voip] h323 or mgcp with fractional pri

Hello,

I'm setting up a new gateway and I'm new to using CUCM.  I'm wondering what is recommended for a gateway protocol when using a fractional pri?  I have read that there are workarounds for using mgcp with a fractional pri, but am I better off going with h323 for other reasons?

Thanks,
Dan.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.