[cisco-voip] h323 or mgcp with fractional pri

[Scott Voll]

YES.

Did that help?

:-)  For partial PRI there are work arounds.  but you can set it up in H323.
 So you do have the ability to do it both ways.

Where the question comes down to, is what features are better supported by
one or the other.  and with that.... you would need to make that decision
based on what you need.

Personally I like H323, but it take more to configure.

Scott

On Thu, Oct 28, 2010 at 8:11 AM, Dan Letkeman <danletkeman at gmail.com> wrote:

> Hello,
>
> I'm setting up a new gateway and I'm new to using CUCM.  I'm wondering
> what is recommended for a gateway protocol when using a fractional
> pri?  I have read that there are workarounds for using mgcp with a
> fractional pri, but am I better off going with h323 for other reasons?
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101028/cbedfad7/attachment.html>