[cisco-voip] Renumbering Unity ports?

[Go0se]

You can simply move them to a new PT then create a new css that can see the
new PT and assign that PT to the vm pilot.

 

Thanks,

 

Go0se

 

My blog:

http://atc.go0se.com

 

--------------------------------------------

Help Hopegivers International

Feed the orphans of Haiti and India

http://www.hopegivers.org

--------------------------------------------

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dave Wolgast
Sent: Friday, October 29, 2010 10:14 AM
To: Cisco VOIP Newsletter - puck.nether.net
Subject: [cisco-voip] Renumbering Unity ports?

 

Is it reasonable/possible to renumber an existing set of voicemail ports, or
do I have to remove them then recreate them in Unity (5.0) Integration
Manager and CUCM (6.1(4)).

A set of ports was created awhile back which now conflicts with a range of
DIDs that were recently purchased.  I want to move the vm port range so that
there are no longer conflicts (the phones/DNs are in a different partition
from the ports, so dialing the phones isn't a problem, but Unity can't
handle forwarded calls from those DNs).

Any other creative ways to handle this?

-- 
Dave Wolgast
Livonia, NY

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101029/15d45169/attachment.html>