[cisco-voip] CCX 8 script won't refresh

[Anthony Holloway]

If you did that, wouldn't you lose all of your application parameter
changes?  And wouldn't there be a period of down time between calls?

Anthony

On Fri, Oct 29, 2010 at 1:11 PM, sashank <sasanka.pathi at locuz.com> wrote:

>  When ever you make any change in the script you need to remove the
> existing script and add the changed script. It should work then.
>
>
>
> Warm Regards,
>
> *Venkata Sasanka.pathi(-91 950 265 2290)*
>
> *Consultant | unified communications*
>
> *Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)*
>
> *Sudha House 3, Tilak Road Abids, Hydrabad *
>
> *Andhra Pradesh - 500 001*
>
> *| Mobile: 09502652290 | Phone : +91 -040 - 66115656 | *
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Eric Pedersen
> *Sent:* Friday, October 29, 2010 1:10 AM
> *To:* Anthony Holloway
>
> *Cc:* Cisco VoIP Group
> *Subject:* Re: [cisco-voip] CCX 8 script won't refresh
>
>
>
> I checked the bug toolkit but didn’t find anything.  I can open a TAC case
> but thought I’d check with cisco-voip first to see if anyone else had run
> into the same problem.
>
>
>
> *From:* avholloway at gmail.com [mailto:avholloway at gmail.com] *On Behalf Of *Anthony
> Holloway
> *Sent:* October 27, 2010 7:23 PM
> *To:* Eric Pedersen
> *Cc:* Cisco VoIP Group
> *Subject:* Re: [cisco-voip] CCX 8 script won't refresh
>
>
>
> All I know is, sometimes a fix for one defect, becomes a fix for another
> undocumented defect.  And sometimes, reinstalling/repairing fixes things
> too.
>
>
>
> You could open a new defect for 8.0(2), but most likely will have to
> install SU2 to get the fix.  Have you already checked the Bug Toolkit?  Are
> you able to open a TAC case?
>
>
>
> Anthony
>
> On Wed, Oct 27, 2010 at 7:00 PM, Eric Pedersen <eric.pedersen at sait.ca>
> wrote:
>
> It’s 8.0(2), no SUs.  I didn’t see anything in the SU1 release notes to
> indicate that it fixes this.
>
>
>
> *From:* avholloway at gmail.com [mailto:avholloway at gmail.com] *On Behalf Of *Anthony
> Holloway
> *Sent:* October 27, 2010 4:52 PM
> *To:* Eric Pedersen
> *Cc:* Cisco VoIP Group
> *Subject:* Re: [cisco-voip] CCX 8 script won't refresh
>
>
>
> What version of UCCX?  There is now an 8.0(2) SU1.
>
>
>
> Anthony
>
> On Wed, Oct 27, 2010 at 11:03 AM, Eric Pedersen <eric.pedersen at sait.ca>
> wrote:
>
> Is anyone else running CCX 8.0?
>
>
>
> When I overwrite a script in the repository, CCX won’t start using the new
> version until I restart the engine service.  I tried refreshing both the
> script and application, but when I run a reactive debug, I still get the old
> version.  Restarting the engine causes CCX to use the new version, but once
> we go into production, we obviously can’t restart the engine at every script
> change. These are translation route applications for ICM in case it matters
> for some reason.  Has anyone seen this?
>
>
>
> Eric
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101029/35f3d271/attachment.html>