[cisco-voip] Cisco ISDN noise levels

[Cheng, Karen]

Hey guys,

Does anyone know whether there is a "recommended" noise level, input and output signal level for ISDN calls coming into a Cisco voice gateway?

I can get the statistics for live calls but not sure what to compare it to or whether they are within a reasonable level.

EG

CoderTypeRate=g711ulaw
NoiseLevel=-72
ACOMLevel=45
OutSignalLevel=-54
InSignalLevel=-66
InfoActivity=1
ERLLevel=45

Karen Cheng
Voice Network Engineer



Call RACQ Auto Glass on 13 1905 today for all your windscreen replacement and chip repair needs. Members receive 20% off.


Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101101/ba4d4c5e/attachment.html>