[cisco-voip] DECT phones

[Ahmed Elnagar]

I did it for a hotel once using an ATA and it was amazing and the coverage was really very good "sorry I don’t remember the phone vendor".

 Best Regards;
  Ahmed Elnagar
  Senior Network PS Engineer
  Mob: +2019-0016211
  CCIE#24697 (Voice)
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ratko Dodevski
Sent: Saturday, September 04, 2010 3:39 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DECT phones

Hi guys,
I have this customer (a shopping mall) that requires several mobile
phones. Because there is no wireless coverage in place and there is no
interest in doing this (especial not in the parking floors), I'm
looking into some DECT phones with additional  antennas acting as a
repeaters. Does anyone has any experience in this and some
recommendations? The phones need to register on Call Manager 7, so I
was thinking of using Cisco SPA (or ATA) to convert the analog to IP
signal. Any thoughts?

-- 
Ratko
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message.