[cisco-voip] Unattended Port - Check this check box to indicate an unattended port on this device.

[Mathew Miller]

On one of the archives Wes indicated the following:
>>>
 Used for out of dialog REFER  processing. If checked it designates this trunk as connected to an application server, such as a voice mail system. This is to avoid the cases where the REFERee and the REFER to target are both application servers.

/Wes
>>>>

On Sep 9, 2010, at 6:03 PM, Norton, Mike wrote:

> I’ve often wondered the same thing, and have also found it doesn’t seem to affect anything. The documentation Mathew quoted doesn’t really give me a better understanding of what it does. Typical of Cisco documentation: “Unattended Port – check this box if it’s an unattended port.” Gee, thanks.
>  
> What is the meaning of the term “unattended port” and why would I want to use this checkbox?
>  
> --
> Mike Norton
> I.T. Support
> Peace Wapiti School Division No. 76
> Helpdesk: 780-831-3080
> Direct: 780-831-3076
>  
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Omori, Hiroshi
> Sent: September-09-10 3:47 PM
> To: 'Mathew Miller'
> Cc: cisco-voip mailinglist
> Subject: Re: [cisco-voip] Unattended Port - Check this check box to indicate an unattended port on this device.
>  
> Thanks!
>  
> From: Mathew Miller [mailto:miller.mathew at gmail.com] 
> Sent: Thursday, September 09, 2010 2:22 PM
> To: Omori, Hiroshi
> Cc: cisco-voip mailinglist
> Subject: Re: [cisco-voip] Unattended Port - Check this check box to indicate an unattended port on this device.
>  
> Unattended Port
> Check this check box if calls can be redirected, transferred and forwarded to an unattended port, such as a voice mail port.
> The default value for this check box is unchecked.
>  
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b06trunk.html
>  
> On Sep 9, 2010, at 3:42 PM, Omori, Hiroshi wrote:
>  
> 
> I’m feeling kind of lazy today and got tired of searching the Cisco documentation for the “Unattended Port” checkbox that appears when configuring an FXS, FXO, DID, etc. gateway  in the CUCM.
>  
> Does anyone know what purpose the “Unattended Port” checkbox does? 
>  
> Checking or unchecking doesn’t seem to affect inbound or outbound calling.
>  
> CUCM 6.1.3.3190
> 3845 VIC2-2FXO or VIC3-2FXS/DID
>  
> Thanks!
>  
> Hiroshi Omori
> UCLA CTS
> University of California, Los Angeles
> Communication Technology Services
> Building CSB1, 2nd floor
> Mail Stop 136308
> 741 Charles E. Young Drive South
> Los Angeles, California, 90095
> (310) 206-3700
>  
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100910/5647e553/attachment.html>