[cisco-voip] CME to CUBE config

[Barış Gülten]

Hi, CME not need CUBE license, CME can do outside sip trunk.

Here is the example. 

 

Voice service voip 

 address-hiding

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

h323

sip

  bind control source-interface Loopback0

  bind media source-interface Loopback0

  registrar server expires max 3600 min 3600

!

voice class codec 1

codec preference 1 g729r8

!

 

interface Loopback0

ip address xx.xx.xx.xx 255.255.255.252  /real ip

!

 

dial-peer voice 90 voip

corlist outgoing call-international

preference 1

destination-pattern 00T

voice-class codec 1

session protocol sipv2

session target ipv4:62.244.205.100

dtmf-relay rtp-nte

clid network-number 0232xxxxxxx

!

 

Best regards, Baris.

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
Sent: Friday, September 10, 2010 1:08 PM
To: cisco-voip
Subject: [cisco-voip] CME to CUBE config

 

Hello,
can somebody help me with a (example) config for a CME <-> CUBE setup?

Many thanks!

regards, Marty

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100910/9dd4c98c/attachment.html>