[cisco-voip] CME to CUBE config

[Gregory Wenzel]

2800 series.this is true....2900/3900 series need cube license is:
expensive. I think we quoted 75 sip sessions cost  $6,000.00

On Sep 10, 2010 8:14 AM, "Barış Gülten" <barisgulten at gmail.com> wrote:
> Hi, CME not need CUBE license, CME can do outside sip trunk.
>
> Here is the example.
>
>
>
> Voice service voip
>
> address-hiding
>
> allow-connections h323 to h323
>
> allow-connections h323 to sip
>
> allow-connections sip to h323
>
> allow-connections sip to sip
>
> supplementary-service h450.12
>
> h323
>
> sip
>
> bind control source-interface Loopback0
>
> bind media source-interface Loopback0
>
> registrar server expires max 3600 min 3600
>
> !
>
> voice class codec 1
>
> codec preference 1 g729r8
>
> !
>
>
>
> interface Loopback0
>
> ip address xx.xx.xx.xx 255.255.255.252 /real ip
>
> !
>
>
>
> dial-peer voice 90 voip
>
> corlist outgoing call-international
>
> preference 1
>
> destination-pattern 00T
>
> voice-class codec 1
>
> session protocol sipv2
>
> session target ipv4:62.244.205.100
>
> dtmf-relay rtp-nte
>
> clid network-number 0232xxxxxxx
>
> !
>
>
>
> Best regards, Baris.
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
> Sent: Friday, September 10, 2010 1:08 PM
> To: cisco-voip
> Subject: [cisco-voip] CME to CUBE config
>
>
>
> Hello,
> can somebody help me with a (example) config for a CME <-> CUBE setup?
>
> Many thanks!
>
> regards, Marty
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100912/9ef7b726/attachment.html>