[cisco-voip] CME to CUBE config

[James Buchanan]

That’s not the case. CME even with the 2900s has the license needed to do SIP trunks to the PSTN.

 

James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions 
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com <mailto:jbuchanan at ctiusa.com> 
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <http://www.presidio.com> 

CCIE #25863, Voice



 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory Wenzel
Sent: Sunday, September 12, 2010 2:40 PM
To: Barış Gülten
Cc: cisco-voip
Subject: Re: [cisco-voip] CME to CUBE config

 

2800 series.this is true....2900/3900 series need cube license is: expensive. I think we quoted 75 sip sessions cost  $6,000.00

On Sep 10, 2010 8:14 AM, "Barış Gülten" <barisgulten at gmail.com> wrote:
> Hi, CME not need CUBE license, CME can do outside sip trunk.
> 
> Here is the example. 
> 
> 
> 
> Voice service voip 
> 
> address-hiding
> 
> allow-connections h323 to h323
> 
> allow-connections h323 to sip
> 
> allow-connections sip to h323
> 
> allow-connections sip to sip
> 
> supplementary-service h450.12
> 
> h323
> 
> sip
> 
> bind control source-interface Loopback0
> 
> bind media source-interface Loopback0
> 
> registrar server expires max 3600 min 3600
> 
> !
> 
> voice class codec 1
> 
> codec preference 1 g729r8
> 
> !
> 
> 
> 
> interface Loopback0
> 
> ip address xx.xx.xx.xx 255.255.255.252 /real ip
> 
> !
> 
> 
> 
> dial-peer voice 90 voip
> 
> corlist outgoing call-international
> 
> preference 1
> 
> destination-pattern 00T
> 
> voice-class codec 1
> 
> session protocol sipv2
> 
> session target ipv4:62.244.205.100
> 
> dtmf-relay rtp-nte
> 
> clid network-number 0232xxxxxxx
> 
> !
> 
> 
> 
> Best regards, Baris.
> 
> 
> 
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
> Sent: Friday, September 10, 2010 1:08 PM
> To: cisco-voip
> Subject: [cisco-voip] CME to CUBE config
> 
> 
> 
> Hello,
> can somebody help me with a (example) config for a CME <-> CUBE setup?
> 
> Many thanks!
> 
> regards, Marty
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100912/b7cfe450/attachment.html>