[cisco-voip] CME to CUBE config

[Nick Matthews]

Some of this is true, some not.

Basic guideline - any time you have a SIP trunk you need a CUBE.  This
includes CME, CUCM, CUCM-SME, etc.

Any time you have a CUBE (CME, 2800/3800, 2900/3900, ASR) you need
licensing.

The licensing is not enforced on any platform, but there are plans.  CUSP is
licensed and enforced however.

-nick

2010/9/12 James Buchanan <jbuchanan at ctiusa.com>

> That’s not the case. CME even with the 2900s has the license needed to do
> SIP trunks to the PSTN.
>
>
>
> *James Buchanan *|* Senior Network Engineer *| *South Region *|* Presidio
> Networked Solutions
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 *|* **
> jbuchanan at presidio.com <jbuchanan at ctiusa.com>
> **D: 615-866-5729* | *F:* *615-866-5781* | *www.presidio.com* <*
> http://www.presidio.com*>
>
> *CCIE #25863, Voice*
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Gregory Wenzel
> *Sent:* Sunday, September 12, 2010 2:40 PM
> *To:* Barış Gülten
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] CME to CUBE config
>
>
>
> 2800 series.this is true....2900/3900 series need cube license is:
> expensive. I think we quoted 75 sip sessions cost  $6,000.00
>
> On Sep 10, 2010 8:14 AM, "Barış Gülten" <barisgulten at gmail.com> wrote:
> > Hi, CME not need CUBE license, CME can do outside sip trunk.
> >
> > Here is the example.
> >
> >
> >
> > Voice service voip
> >
> > address-hiding
> >
> > allow-connections h323 to h323
> >
> > allow-connections h323 to sip
> >
> > allow-connections sip to h323
> >
> > allow-connections sip to sip
> >
> > supplementary-service h450.12
> >
> > h323
> >
> > sip
> >
> > bind control source-interface Loopback0
> >
> > bind media source-interface Loopback0
> >
> > registrar server expires max 3600 min 3600
> >
> > !
> >
> > voice class codec 1
> >
> > codec preference 1 g729r8
> >
> > !
> >
> >
> >
> > interface Loopback0
> >
> > ip address xx.xx.xx.xx 255.255.255.252 /real ip
> >
> > !
> >
> >
> >
> > dial-peer voice 90 voip
> >
> > corlist outgoing call-international
> >
> > preference 1
> >
> > destination-pattern 00T
> >
> > voice-class codec 1
> >
> > session protocol sipv2
> >
> > session target ipv4:62.244.205.100
> >
> > dtmf-relay rtp-nte
> >
> > clid network-number 0232xxxxxxx
> >
> > !
> >
> >
> >
> > Best regards, Baris.
> >
> >
> >
> > From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
> > Sent: Friday, September 10, 2010 1:08 PM
> > To: cisco-voip
> > Subject: [cisco-voip] CME to CUBE config
> >
> >
> >
> > Hello,
> > can somebody help me with a (example) config for a CME <-> CUBE setup?
> >
> > Many thanks!
> >
> > regards, Marty
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100912/386fc124/attachment.html>