[cisco-voip] x9xx the one-time use of the username "cisco" withthe password "cisco"

Fri Sep 10 10:15:03 EDT 2010

I had the same problem...but simply restarting the router "provided that
you did not do wr mem" will boot normally and the user cisco will work
okay.

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, September 10, 2010 5:26 AM
To: Jason Aarons (US)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] x9xx the one-time use of the username "cisco"
withthe password "cisco"

Nice, my brain was inserting the word "until" in that last line, and
wasn't until I had pasted it into this email and re-read it 3 times that
I caught up.  That's what I get for checking email late at night.

-Ryan

On Sep 9, 2010, at 10:18 PM, Jason Aarons (US) wrote:

Re-read the whole banner. It's a new banner. Somehow the user cisco is
now a one-time use.

I didn't read it , thinking it was the old banner.

I like the idea of write erase after login.

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, September 09, 2010 10:01 PM
To: Jason Aarons (US)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] x9xx the one-time use of the username "cisco"
with the password "cisco"

The way I read that banner motd is that the cisco user is there until
you remove it.  If you get logged off why can't you just login as cisco
again?

-Ryan

On Sep 9, 2010, at 5:47 PM, Jason Aarons (US) wrote:

Guess I should have read the banner motd....I logged in with
cisco/cisco, got busy and found the session timed out , and I'm locked
out of router...maybe they shouldn't factory ship with session timeout
on console port?

Guess I have to do a password recovery now....

-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device.

This feature requires the one-time use of the username "cisco" with the

password "cisco". These default credentials have a privilege level of
15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN

CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>

no username cisco

Replace <myuser> and <mypassword> with the username and password you
want

to use.

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE
ABLE

TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100910/c1b6fe6a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100910/c1b6fe6a/attachment.jpg>