[cisco-voip] CME to CUBE config

[Mark Holloway]

I think you guys are confusing CUBE Lite and CUBE.  CUBE Lite supports sip to sip without requiring the purchase of an additional license. 

On Sep 12, 2010, at 2:56 PM, Gregory Wenzel wrote:

> Don't expect tac support without proper licensing
> 
> On Sep 12, 2010 4:35 PM, "James Buchanan" <jbuchanan at ctiusa.com> wrote:
> > That’s not the case. CME even with the 2900s has the license needed to do SIP trunks to the PSTN.
> > 
> > 
> > 
> > James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions 
> > 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com <mailto:jbuchanan at ctiusa.com> 
> > D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <http://www.presidio.com> 
> > 
> > CCIE #25863, Voice
> > 
> > 
> > 
> > 
> > 
> > From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory Wenzel
> > Sent: Sunday, September 12, 2010 2:40 PM
> > To: Barış Gülten
> > Cc: cisco-voip
> > Subject: Re: [cisco-voip] CME to CUBE config
> > 
> > 
> > 
> > 2800 series.this is true....2900/3900 series need cube license is: expensive. I think we quoted 75 sip sessions cost $6,000.00
> > 
> > On Sep 10, 2010 8:14 AM, "Barış Gülten" <barisgulten at gmail.com> wrote:
> >> Hi, CME not need CUBE license, CME can do outside sip trunk.
> >> 
> >> Here is the example. 
> >> 
> >> 
> >> 
> >> Voice service voip 
> >> 
> >> address-hiding
> >> 
> >> allow-connections h323 to h323
> >> 
> >> allow-connections h323 to sip
> >> 
> >> allow-connections sip to h323
> >> 
> >> allow-connections sip to sip
> >> 
> >> supplementary-service h450.12
> >> 
> >> h323
> >> 
> >> sip
> >> 
> >> bind control source-interface Loopback0
> >> 
> >> bind media source-interface Loopback0
> >> 
> >> registrar server expires max 3600 min 3600
> >> 
> >> !
> >> 
> >> voice class codec 1
> >> 
> >> codec preference 1 g729r8
> >> 
> >> !
> >> 
> >> 
> >> 
> >> interface Loopback0
> >> 
> >> ip address xx.xx.xx.xx 255.255.255.252 /real ip
> >> 
> >> !
> >> 
> >> 
> >> 
> >> dial-peer voice 90 voip
> >> 
> >> corlist outgoing call-international
> >> 
> >> preference 1
> >> 
> >> destination-pattern 00T
> >> 
> >> voice-class codec 1
> >> 
> >> session protocol sipv2
> >> 
> >> session target ipv4:62.244.205.100
> >> 
> >> dtmf-relay rtp-nte
> >> 
> >> clid network-number 0232xxxxxxx
> >> 
> >> !
> >> 
> >> 
> >> 
> >> Best regards, Baris.
> >> 
> >> 
> >> 
> >> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
> >> Sent: Friday, September 10, 2010 1:08 PM
> >> To: cisco-voip
> >> Subject: [cisco-voip] CME to CUBE config
> >> 
> >> 
> >> 
> >> Hello,
> >> can somebody help me with a (example) config for a CME <-> CUBE setup?
> >> 
> >> Many thanks!
> >> 
> >> regards, Marty
> >> 
> > 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100914/c2ed12b8/attachment.html>