[cisco-voip] CME to CUBE config

[Gregory Wenzel]

Don't expect tac support without proper licensing

On Sep 12, 2010 4:35 PM, "James Buchanan" <jbuchanan at ctiusa.com> wrote:
> That’s not the case. CME even with the 2900s has the license needed to do
SIP trunks to the PSTN.
>
>
>
> James Buchanan | Senior Network Engineer | South Region | Presidio
Networked Solutions
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:
jbuchanan at ctiusa.com>
> D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <
http://www.presidio.com>
>
> CCIE #25863, Voice
>
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory Wenzel
> Sent: Sunday, September 12, 2010 2:40 PM
> To: Barış Gülten
> Cc: cisco-voip
> Subject: Re: [cisco-voip] CME to CUBE config
>
>
>
> 2800 series.this is true....2900/3900 series need cube license is:
expensive. I think we quoted 75 sip sessions cost $6,000.00
>
> On Sep 10, 2010 8:14 AM, "Barış Gülten" <barisgulten at gmail.com> wrote:
>> Hi, CME not need CUBE license, CME can do outside sip trunk.
>>
>> Here is the example.
>>
>>
>>
>> Voice service voip
>>
>> address-hiding
>>
>> allow-connections h323 to h323
>>
>> allow-connections h323 to sip
>>
>> allow-connections sip to h323
>>
>> allow-connections sip to sip
>>
>> supplementary-service h450.12
>>
>> h323
>>
>> sip
>>
>> bind control source-interface Loopback0
>>
>> bind media source-interface Loopback0
>>
>> registrar server expires max 3600 min 3600
>>
>> !
>>
>> voice class codec 1
>>
>> codec preference 1 g729r8
>>
>> !
>>
>>
>>
>> interface Loopback0
>>
>> ip address xx.xx.xx.xx 255.255.255.252 /real ip
>>
>> !
>>
>>
>>
>> dial-peer voice 90 voip
>>
>> corlist outgoing call-international
>>
>> preference 1
>>
>> destination-pattern 00T
>>
>> voice-class codec 1
>>
>> session protocol sipv2
>>
>> session target ipv4:62.244.205.100
>>
>> dtmf-relay rtp-nte
>>
>> clid network-number 0232xxxxxxx
>>
>> !
>>
>>
>>
>> Best regards, Baris.
>>
>>
>>
>> From: cisco-voip-bounces at puck.nether.net [mailto:
cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
>> Sent: Friday, September 10, 2010 1:08 PM
>> To: cisco-voip
>> Subject: [cisco-voip] CME to CUBE config
>>
>>
>>
>> Hello,
>> can somebody help me with a (example) config for a CME <-> CUBE setup?
>>
>> Many thanks!
>>
>> regards, Marty
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100912/c2519792/attachment.html>