[cisco-voip] CCM 7 = transcoding

[Cheng, Karen]

PVDM3's support universal Transcoding. You enable this by:

Dspfarm profile X transcode universal
Codecs x
Max sessions X (halved due to universal)
Associate application sccp



Karen Cheng
Voice Network Engineer

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of John.VanLaecke at ghd.com
Sent: Wednesday, 15 September 2010 11:36 AM
To: cisco.voip
Cc: cisco-voip-bounces at puck.nether.net; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM 7 = transcoding

This is the configuration i use to do this




sccp local Loopback0
sccp ccm CUCM IP identifier 2 version 5.0.1
sccp ccm CUCM IP  identifier 1 version 5.0.1
sccp ip precedence 3
sccp
!
sccp ccm group 1
 associate ccm 1 priority 1
 associate ccm 2 priority 2
 associate profile 1 register XXX-CONF
 associate profile 2 register XXX-XCODE
!
dspfarm profile 2 transcode
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 codec g729br8
 maximum sessions 10
 associate application SCCP
!
dspfarm profile 1 conference
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 codec g729br8
 maximum sessions 18
 associate application SCCP
!
Regards,

John Van Laecke
Network Administrator

GHD   Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke at ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au<http://www.ghd.com.au/_>

Water<http://www.ghd.com/sectors/water/> | Energy & Resources<http://www.ghd.com/global/sectors/energy--resources/> | Environment<http://www.ghd.com/sectors/environment/> | Property & Buildings<http://www.ghd.com/global/sectors/property--buildings/> | Transportation<http://www.ghd.com/global/sectors/transportation/>

Please consider the environment before printing this email

From:

"cisco.voip" <cisco.voip at verizon.net>

To:

cisco-voip at puck.nether.net

Date:

15/09/2010 08:59 AM

Subject:

[cisco-voip] CCM 7 = transcoding

Sent by:

cisco-voip-bounces at puck.nether.net




________________________________



  All,
I am trying to configure transcoding and conferencing for the new pvdm3
and i have cisco call manager 7.2.
I have been searching cco and am not turning up example config or anything.
Has anyone else done this yet and could you provide me any links to the
call manager part of the config?

THanks

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_____________________
This e-mail has been scanned for viruses by MessageLabs.


_____________________
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________
This e-mail has been scanned for viruses by MessageLabs.

Show Your RACQ Card & Save this September school holiday at AMF Bowling Centres, Alma Park Zoo and Aussie World! Visit www.racq.com.au/benefits for more discount holiday ideas.


Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100915/34003dd6/attachment.html>