[cisco-voip] CME to CUBE config

Bill Riley bill at hitechconnection.net
Wed Sep 15 09:03:04 EDT 2010


I think you are confusing CUBE Light with getting something for nothing.  Can you provide a specific link or document that states if you are using a 28XX or 29XX router with SIP to SIP connections you do not need a CUBE license? 

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Tuesday, September 14, 2010 11:29 AM
To: Gregory Wenzel
Cc: cisco-voip
Subject: Re: [cisco-voip] CME to CUBE config

 

I think you guys are confusing CUBE Lite and CUBE.  CUBE Lite supports sip to sip without requiring the purchase of an additional license. 

 

On Sep 12, 2010, at 2:56 PM, Gregory Wenzel wrote:





Don't expect tac support without proper licensing 

On Sep 12, 2010 4:35 PM, "James Buchanan" <jbuchanan at ctiusa.com> wrote:
> That’s not the case. CME even with the 2900s has the license needed to do SIP trunks to the PSTN.
> 
> 
> 
> James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions 
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com <mailto:jbuchanan at ctiusa.com> 
> D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <http://www.presidio.com/>  <http://www.presidio.com <http://www.presidio.com/> > 
> 
> CCIE #25863, Voice
> 
> 
> 
> 
> 
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory Wenzel
> Sent: Sunday, September 12, 2010 2:40 PM
> To: Barış Gülten
> Cc: cisco-voip
> Subject: Re: [cisco-voip] CME to CUBE config
> 
> 
> 
> 2800 series.this is true....2900/3900 series need cube license is: expensive. I think we quoted 75 sip sessions cost $6,000.00
> 
> On Sep 10, 2010 8:14 AM, "Barış Gülten" <barisgulten at gmail.com> wrote:
>> Hi, CME not need CUBE license, CME can do outside sip trunk.
>> 
>> Here is the example. 
>> 
>> 
>> 
>> Voice service voip 
>> 
>> address-hiding
>> 
>> allow-connections h323 to h323
>> 
>> allow-connections h323 to sip
>> 
>> allow-connections sip to h323
>> 
>> allow-connections sip to sip
>> 
>> supplementary-service h450.12
>> 
>> h323
>> 
>> sip
>> 
>> bind control source-interface Loopback0
>> 
>> bind media source-interface Loopback0
>> 
>> registrar server expires max 3600 min 3600
>> 
>> !
>> 
>> voice class codec 1
>> 
>> codec preference 1 g729r8
>> 
>> !
>> 
>> 
>> 
>> interface Loopback0
>> 
>> ip address xx.xx.xx.xx 255.255.255.252 /real ip
>> 
>> !
>> 
>> 
>> 
>> dial-peer voice 90 voip
>> 
>> corlist outgoing call-international
>> 
>> preference 1
>> 
>> destination-pattern 00T
>> 
>> voice-class codec 1
>> 
>> session protocol sipv2
>> 
>> session target ipv4:62.244.205.100
>> 
>> dtmf-relay rtp-nte
>> 
>> clid network-number 0232xxxxxxx
>> 
>> !
>> 
>> 
>> 
>> Best regards, Baris.
>> 
>> 
>> 
>> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
>> Sent: Friday, September 10, 2010 1:08 PM
>> To: cisco-voip
>> Subject: [cisco-voip] CME to CUBE config
>> 
>> 
>> 
>> Hello,
>> can somebody help me with a (example) config for a CME <-> CUBE setup?
>> 
>> Many thanks!
>> 
>> regards, Marty
>> 
> 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100915/bb5e2593/attachment.html>


More information about the cisco-voip mailing list