[cisco-voip] destination-pattern #880$

[Charles Goldsmith]

I wondered why # didn't work that way in CUCM, but never got around to
looking for it.  Where is the setting for this in CUCM 7/8?

Thanks
Charles

On Thu, Sep 16, 2010 at 6:45 PM, Nick Matthews <matthnick at gmail.com> wrote:

> A little known fact is that the # is the default terminator on the
> gateway.  In CUCM, you have to manually configure this to be a terminator.
> An example would be 9.011!#.  (An unknown amount of digits dialing
> internationally, with the ability to stop the 10 second interdigit timeout
> with a #).
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100917/050da48f/attachment.html>