[cisco-voip] destination-pattern #880$

[Nate VanMaren]

The interesting thing is that # is a terminator in the NANP dialplan so if you use @, it's already setup.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Charles Goldsmith
Sent: Friday, September 17, 2010 1:18 PM
To: Nick Matthews
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] destination-pattern #880$

I wondered why # didn't work that way in CUCM, but never got around to looking for it.  Where is the setting for this in CUCM 7/8?

Thanks
Charles
On Thu, Sep 16, 2010 at 6:45 PM, Nick Matthews <matthnick at gmail.com<mailto:matthnick at gmail.com>> wrote:
A little known fact is that the # is the default terminator on the gateway.  In CUCM, you have to manually configure this to be a terminator.  An example would be 9.011!#.  (An unknown amount of digits dialing internationally, with the ability to stop the 10 second interdigit timeout with a #).


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100917/e02f1767/attachment.html>