[cisco-voip] ISDN 10 configuration to 2821

Tim Smith smithsonianwa at gmail.com
Tue Sep 21 05:06:03 EDT 2010


Be careful with using ccm-manager config command. Cucm technically
does not support partial E1. You can either disable the config
command. Or alternatively you can put the other 20 channels in
maintenance mode from ccm service params. (max of 5 circuits). Or use
h323.

Sent from my iPhone

On 21/09/2010, at 5:22, Dave Cardwell <dave.cardwell1 at gmail.com> wrote:

> On Mon, Sep 20, 2010 at 6:54 PM, Dockendorf, Dave
> <Dave.Dockendorf at ecolab.com> wrote:
>> I have a site in Singapore currently using this service in their current
>> phone system.  We are planning to move it over to our 2821 and give them IP
>> phones, but I need some guidance.
>>
>> I have done many domestic T1 PRI connections to voice gateways, but never an
>> E1 or ISDN 10.
>>
>> I know I will need to configure the controller E1, but what are the
>> specifics for the timeslots?  (Guessing: pri-group timeslots 1-10)?
>>
>> Along with that, do you know what the D channel is?  I have seen ISDN 30
>> configurations in Australia, using pri-group timeslots 1-31, and that uses
>> channel 15 for the D channel.
>
> Hi Dave,
>
> E1 always uses channel 15 for the d-channel, even if there are less b-channels.
> If you just configure
> controller e1
> pri-group timeslots 1-10
>
> IOS will automatically modify it to include channel 15 for the
> d-channel* and create serial x/y:15
>
> *I think it shows up as "pri-group timeslots 1-10,15" but don't have
> one to check just now.
>
> Hope it helps,
> Dave
>
>>
>> Thanks
>>
>>
>> Dave Dockendorf
>> Lead Network Engineer - Unified Communication Services
>> Information Services - Global Production Operations
>>
>> ECOLAB
>> 655 Lone Oak Drive, ESC E-308-12
>> Eagan, MN 55121
>>
>> T  +1 651-795-5105
>> C  +1 651-248-7040
>> F  +1 651-204-7500
>>
>> dave.dockendorf at ecolab.com
>>
>> CONFIDENTIALITY NOTICE:
>> This e-mail communication and any attachments may contain proprietary and
>> privileged information for the use of the designated recipients named above.
>> Any unauthorized review, use, disclosure or distribution is prohibited.
>> If you are not the intended recipient, please contact the sender by reply
>> e-mail and destroy all copies of the original message.
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list