[cisco-voip] Door Bell/Intercom Recommendations

[Jason Aarons (US)]

You really need a FXO solution like a Valcom 2003A with Door Strike/Call Box.

FXS has a lack of disconnect supervision/standards across Cisco proudcts (CallManager vs CME vs ATA vs VG202 vs 2FXO).

I always get burned trying FXS.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Tuesday, September 21, 2010 9:12 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Door Bell/Intercom Recommendations

We currently have a solution that doesn't work, does anyone have any solutions that have worked for them?
Just needs to run off an FXS port and if possible can be programmed to always dial the same number when rung.


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!



-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100921/46e1741e/attachment.html>