[cisco-voip] Outbound calls failing after IOS upgrade

[Sechaba Mokoena]

Hi Karen,

I've attached my basic config, its currently working on the version of IOS
that I'm running. The call doesn't reach the gateway after the IOS uograde.
The Route List is registered and populated with the gateway.

Kind regards,

Sechaba Mokoena

On Sun, Sep 19, 2010 at 5:39 AM, Karen Cheng <kaz.cheng at gmail.com> wrote:

> It may be more helpful if you post your basic configuration and a debug
> q931 output? Or a debug voip dialpeer output?
>
> That way you can see where it might be going wrong or if there are errors
> being thrown up when you try and make an outbound call?
>
> Is the call from Call Manager even reaching the gateway even? etc etc
>
> Is your Route List registered and populated with the gateway in it?
>
> Cheers
>
> Karen Cheng
>
> On Sun, Sep 19, 2010 at 7:44 AM, SechabaM <sechabam at gmail.com> wrote:
>
>> Hi,
>>
>> My router is setup as an H.323 gateway.
>>
>> Kind regards,
>>
>> Sechaba Mokoena
>>
>>
>>
>> On 18 Sep 2010, at 7:22 PM, "sashank" <sasanka.pathi at locuz.com> wrote:
>>
>>  Hi,
>>
>>
>>
>> Whats the setup you have  call manager>> Gateway with MGCP. How is the
>> setup so that we can tell you.
>>
>>
>>
>> Warm Regards,
>>
>> Venkata Sasanka.pathi(-91 950 265 2290)
>>
>> Consultant | unified communications
>>
>> Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)
>>
>> (office:914066115656)
>>
>>   <sasanka.pathi at locuz.com>sasanka.pathi at locuz.com
>>
>> <http://www.locuz.com>www.locuz.com
>>
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Sechaba Mokoena
>> *Sent:* Saturday, September 18, 2010 8:14 PM
>> *To:* <cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>> *Subject:* [cisco-voip] Outbound calls failing after IOS upgrade
>>
>>
>>
>> Hi,
>>
>> I recently upgraded my router to c2900-universalk9_npe-mz.SPA.151-2.T1.bin
>> to support SRST 8.0. I upgraded so my 6921 phones would be supported in
>> SRST. After upgrading I couldn't place any outbound calls, but I could
>> receive calls. Using the CSIM start command from the router, I can dial any
>> external number. Can anyone help here, according to prior IOS release notes,
>> this issue should've been resolved.
>>
>> Kind regards,
>>
>> Sechaba Mokoena
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>>
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100921/73bfbe38/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: INDAOK_2911.log
Type: application/octet-stream
Size: 2205 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100921/73bfbe38/attachment.obj>