[cisco-voip] Caller ID and Standard Local Route Groups

[Matthew Loraditch]

How are people handling this in situations where you need to force caller id to be a certain number?
It used to be I'd setup every site with its own route patterns, etc and then just force caller id on the RG settings in the route list but If I want to use LRG I can't do that, I have to do it either at the individual PRIs or set the external mask on every DN to be the number I want outpulsed. The former is easier but the latter is required if I want LRGs and still need to be able to change caller id for certain situations (mobility, faxes, etc).

Am I missing something here? Is there another way?


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100922/66697a63/attachment.html>