[cisco-voip] Caller ID and Standard Local Route Groups

Nate VanMaren VanMarenNP at ldschurch.org
Wed Sep 22 13:02:44 EDT 2010


Calling party transformations?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Wednesday, September 22, 2010 10:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Caller ID and Standard Local Route Groups

How are people handling this in situations where you need to force caller id to be a certain number?
It used to be I'd setup every site with its own route patterns, etc and then just force caller id on the RG settings in the route list but If I want to use LRG I can't do that, I have to do it either at the individual PRIs or set the external mask on every DN to be the number I want outpulsed. The former is easier but the latter is required if I want LRGs and still need to be able to change caller id for certain situations (mobility, faxes, etc).

Am I missing something here? Is there another way?


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100922/b7218be1/attachment.html>


More information about the cisco-voip mailing list