[cisco-voip] DIDs starting with 9 and outside access code 9

[Jobe Gates]

Could you have the carrier send you 10 digits and then do translations?

Thanks,
Jobe

On Sep 22, 2010, at 3:05 PM, Dave Wolgast <dwolgas1 at rochester.rr.com> wrote:

> CUCM 6.1(4)
> MGCP 3845 VGWs
> 
> I just accepted a DID range 99XX from our local carrier (it was the only range left in the exchange where we wanted to stay).  Unfortunately, our outside access prefix is '9'.
> 
> I would like to translate the 99XX numbers to 59XX, but am not sure how to make it happen.  I know I could do it on the gateway if I were using H.323, but am not sure how to do the translation rules in CUCM.
> 
> May I please have some advice on to I should proceed?  If there is a published example somewhere, let me know and I'll check that out.  I did some searching on the gossamer threads archive and didn't find anything that looked useful.
> 
> Thanks very much!!! 
> 
> -- 
> Dave Wolgast
> Livonia, NY
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip