[cisco-voip] SIP IOS 15.0.1M3 with CUPC 8.0.1

[Cheng, Karen]

Hey guys,

I have logged this issue with Cisco TAC and they are looking into it themselves but I thought I would throw this out there to see if anyone else has run into the problem already.

I currently have some 3845 SIP gateways that when upgraded to version 15.0.1M3 and my Cisco Presence client 8.0.1 is running and call control is active, calls to and from my phone will disconnect after 18seconds of silence and shows up as Recovery on Timer Expiry under a Q931 debug.

The weird thing it if I close CUPC I don't have the issue.

But any other IOS version that I have tried (12.4.24T3 and 12.4.15T13) does not have this problem as far as I can tell.

Has anyone else experienced this and if so have you found a fix for this?

Cheers


Karen Cheng
Voice Network Engineer


Show Your RACQ Card & Save this September school holiday at AMF Bowling Centres, Alma Park Zoo and Aussie World! Visit www.racq.com.au/benefits for more discount holiday ideas.


Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100924/24df14a7/attachment.html>