[cisco-voip] Change 7.1.5 Cluster from names to their IPs

[Wes Sisk]

ccmadmin->system->server

change the names to the correct IP's and reboot.

These names also determine how the IDS database engine comes up. If you 
update them it is critical to update them to the correct value. There is 
no validation in the page. The administrator is the validator.

Regards,
Wes

On 4/1/2011 2:48 AM, Anthony Kouloglou wrote:
> Hi, i have a cluster with 2 CUCMs 7.1.5 and they are defined by name.
> What is the safer way/sequence to change their names into their 
> current IPs? (so no IP change is needed)
> I want to do that so remote sites will not have the need of a DNS to 
> resolve their names.
> If dns is not used and in the remote dhcp is configured to provide the 
> 2 IPs of Publisher and Subscriber, devices such as 69XX and 7931 will 
> put only the publisher as the active CUCM and not the subscriber even 
> though their is IP connectivity!!
> So i guess, if i use the 2 nodes with their IPs, none of these 
> problems will exist.
>
> Cheers
> Anthony
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110401/dbc50207/attachment.html>