[cisco-voip] Change 7.1.5 Cluster from names to their IPs

[Anthony Kouloglou]

Hi Wes,
thanks for the reply.
The question that next pops to my mind is:
1.do that for the pub->reboot (wait for it to boot)
2.and then the sub->reboot

or something else?

On 1/4/2011 16:58, Wes Sisk wrote:
> ccmadmin->system->server
>
> change the names to the correct IP's and reboot.
>
> These names also determine how the IDS database engine comes up. If 
> you update them it is critical to update them to the correct value. 
> There is no validation in the page. The administrator is the validator.
>
> Regards,
> Wes
>
> On 4/1/2011 2:48 AM, Anthony Kouloglou wrote:
>> Hi, i have a cluster with 2 CUCMs 7.1.5 and they are defined by name.
>> What is the safer way/sequence to change their names into their 
>> current IPs? (so no IP change is needed)
>> I want to do that so remote sites will not have the need of a DNS to 
>> resolve their names.
>> If dns is not used and in the remote dhcp is configured to provide 
>> the 2 IPs of Publisher and Subscriber, devices such as 69XX and 7931 
>> will put only the publisher as the active CUCM and not the subscriber 
>> even though their is IP connectivity!!
>> So i guess, if i use the 2 nodes with their IPs, none of these 
>> problems will exist.
>>
>> Cheers
>> Anthony
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110401/37e90256/attachment.html>