[cisco-voip] Locales after upgrade to CCM 7

[Wes Sisk]

Glen,

My contacts indicate that phones must logout of EM, reset, login to EM 
to pickup locale changes.  I have not verified this in the lab.

Regards,
Wes

On 4/13/2011 11:01 AM, Puck wrote:
> Hi Wes,
>
> So no need to log users in and out or change the locales it should just pickup the new locale on reboot and download?
>
> Is there anyway to tell the locale that the phone is currently using ? e.g. confirm that it has taken the new locale?
>
> Thanks
>
> Glen
>
>
> On 13 Apr 2011, at 15:55, Wes Sisk wrote:
>
>> When the phones reset they should TFTP download new locale files.  If not then verify the phones are getting proper TFTP address and TFTP transfers are working.
>>
>> Regards,
>> Wes
>>
>> On 4/13/2011 10:43 AM, Puck wrote:
>>> HI,
>>>
>>> I am upgrading from CCM 6.1.4 to 7.1.5. The client has multiple Locales installed for the phones.
>>>
>>> After I have uploaded the new locales to each of the updated 7.1.5 cluster and rebooted the cluster, do I just need to reboot the phones, or I read somewhere a while ago that I may need to change the locale from the current to another, let it change and then switch it back to the correct locale.
>>>
>>> What is the process to get the new locale activated on the phones? Do I need to log users in and out?
>>>
>>> Thanks
>>>
>>> Glen
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip