[cisco-voip] TSP not controlling a specific phone

[Matthew Loraditch]

I have one single phone that the TSP driver will not control for whatever reason. Every other phone I have tried works. It's in the controlled devices list, I have compared settings to other phones, etc. The actual software is CUBAC, but AFAIK it uses the TSP on the backend for the phone control.  I have two servers for different queues and neither will see the calls on the phone or send the queued calls to the phone.

I have a feeling that If I  just delete the phone and readd that will probably fix it, but wanted to see if anyone had any thoughts first.

This is CM8.5 so it's using the new TSP driver.


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110414/1b2df271/attachment.html>