[cisco-voip] MTP won't register

[Brian Schultz]

I've tried as both IOS Media Termination Point and IOS Enhanced Media
Termination Point.  Rebuilt router config after each and reset in CUCM, same
issue.

I can telnet to both CUCM IP's on port 2000 just fine from the router and
don't have any firewalls in between.

Thanks,
Brian


On Mon, Apr 18, 2011 at 2:06 PM, Bernhard Albler
<bernhard.albler at gmail.com>wrote:

> Did you actually configure it on CCM as a IOS Media Termination Point
> or  IOS _Enhanced_ Media Termination Point? You definitely need the
> latter for PVDM2s and PVDM3s.
> Not sure if you would see the TC_Conn Error in the case.
> Can you telnet to port 2000 on the UCM from the router?
>
> regards
> bernhard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110418/88a62566/attachment.html>