[cisco-voip] IPC Dealer Turrets

[Nick]

Hi Russell

I have just done a deployment with IPC turrets, we used 8.0.3 though and SIP
integration, it's pretty easy just SIP trunks pointing at the SIP servers in
the IPC, standard Route Route Group, Route List Configuration.

The issues I had were when we added PSTN SIP Trunks into the mix and a whole
host of other SIP products, it took a while to get all of them working
together, if you are going to be using ISDN, you should be fine.

We wanted to go with 8.5 though but IPC said they would not support it as
they had not done any integration testing with 8.5 yet, I woud check that
with them before deploying 8.5

Regards

Nick

On 19 April 2011 18:25, Russell Chaseling <rchaseling at plannet21.ie> wrote:

> Hi all,
>
>
>
> I am looking to integrate some IPC Dealer Turrets with a new installation
> of CUCM 8.5. Has anyone had any experience integrating these IPC Turrets
> before? If so I would really appreciate any helpful info on the topic? i.e
> QSIG or SIP or either, any gotchas etc
>
>
>
> Haven't got an exact model number yet but can find out
>
>
>
> Many thanks in advance
>
>
>
> Russell
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110420/3645690a/attachment.html>