[cisco-voip] IPC Dealer Turrets

[Russell Chaseling]

Cheers Nick......just the sort of information I was after. Appreciate it

Russell

________________________________
From: Nick [csvoip at googlemail.com]
Sent: 20 April 2011 17:38
To: Russell Chaseling
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] IPC Dealer Turrets

Hi Russell

I have just done a deployment with IPC turrets, we used 8.0.3 though and SIP integration, it's pretty easy just SIP trunks pointing at the SIP servers in the IPC, standard Route Route Group, Route List Configuration.

The issues I had were when we added PSTN SIP Trunks into the mix and a whole host of other SIP products, it took a while to get all of them working together, if you are going to be using ISDN, you should be fine.

We wanted to go with 8.5 though but IPC said they would not support it as they had not done any integration testing with 8.5 yet, I woud check that with them before deploying 8.5

Regards

Nick

On 19 April 2011 18:25, Russell Chaseling <rchaseling at plannet21.ie<mailto:rchaseling at plannet21.ie>> wrote:
Hi all,

I am looking to integrate some IPC Dealer Turrets with a new installation of CUCM 8.5. Has anyone had any experience integrating these IPC Turrets before? If so I would really appreciate any helpful info on the topic? i.e QSIG or SIP or either, any gotchas etc

Haven't got an exact model number yet but can find out

Many thanks in advance

Russell



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110421/85acbc5e/attachment.html>