[cisco-voip] easy Unity Connection migration?

[Buchanan, James]

Just use COBRAS. You can export all your current data, and reimport into the new Unity Connection server. 

James Buchanan | Technology Manager, UC | South Region | Presidio Networked Solutions 
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com 
CCIE #25863, Voice



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of John P Callahan
Sent: Friday, April 29, 2011 4:40 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] easy Unity Connection migration?


Is there an "easy" way to move from Unity Connection 7.1.(x) to 8.5(x)?

I have CUC 7.1(3) on an MCS 7825 and have 8.5(1) running as cluster of VMs on a pair of UCS C210 servers.

If I read the documentation right - I have to install 7.1 on UCS, which isn't really supported, upgrade it to the exact same version
(7.1.3.32900-4 in this case), then backup the old system and restore it to the VM, and then upgrade the VM?

Is there a shortcut, maybe with CUPI and CUMI?

My 7.1.3.32900-4 started at UC 2.1.x and has always been a little flakey as it gets upgraded from version to version - so I was looking forward to new hardware starting with a clean install and just loading in messages and greetings...

Thanks!

John

--
John P. Callahan<jcallaha at willamette.edu> Director of Infrastructure Services Willamette University
900 State St, Salem OR, 97301
Phone: 503-375-5495

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip