[cisco-voip] Cisco IP Phones Problem

[Jason Aarons (AM)]

That no longer does a factory reset, you just changed to a SIP load.

Register the device in callmanager as a SIP device, then delete and create it as a SCCP device, let it register and it will change loads back to SCCP.

I'm not sure what the new factory default sequence is, but whoever decided to change the sequence should be reprimanded. It tooks me awhile to figure out what was happening when I thought I was reseting phones back to factory default.

Other option is to RMA the phone and get a SCCP back.

Jason Aarons
Consultant
Dimension Data
904-338-3245 mobile

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adewale2
Sent: Thursday, August 04, 2011 8:59 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco IP Phones Problem


Hello ,
 I am having problem with Cisco IP Phones i used factory reset ( 123456789*0#)  for; It is just showing Upgrading and Cisco Logo.
Could anyone advice on what to do  please

Thanks in Advance
Addy




itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110804/50703634/attachment.html>