[cisco-voip] CM reset removes service mgcpapp

[Wes Sisk]

Reset usually removes existing downloaded config then re-applies new 
config from scratch.  Something unexpected is going on in your 
environment.  Most likely, yes, a bug.  Time for TAC case.

Regards,
Wes

On 8/5/2011 9:59 AM, Scott Voll wrote:
>
> Why would a reset on the CM (or apply) remove the
>
> dial-peer 9994 voice pots
> service mgcpapp <--
> port 4 <--
>
> this then causes the port not to register.  is this a bug?
>
> TIA
>
> Scott
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110805/4d5650e6/attachment.html>