[cisco-voip] CM reset removes service mgcpapp

[Scott Voll]

Waiting for TAC engineer.  SR. 618628889  Should be online about an hour.

Scott

On Fri, Aug 5, 2011 at 8:19 AM, Wes Sisk <wsisk at cisco.com> wrote:

> **
> Reset usually removes existing downloaded config then re-applies new config
> from scratch.  Something unexpected is going on in your environment.  Most
> likely, yes, a bug.  Time for TAC case.
>
> Regards,
> Wes
>
>
> On 8/5/2011 9:59 AM, Scott Voll wrote:
>
>
> Why would a reset on the CM (or apply) remove the
>
>  dial-peer 9994 voice pots
> service mgcpapp <--
> port 4 <--
>
> this then causes the port not to register.  is this a bug?
>
>  TIA
>
>  Scott
>
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110805/1314fa77/attachment.html>