[cisco-voip] CM reset removes service mgcpapp

[Scott Voll]

Configuration Auto-Download Information
=======================================
 No configurations downloaded
Current state: Waiting for commands
Configuration Download statistics:
        Download Attempted             : 10
          Download Successful          : 10
          Download Failed              : 0
          TFTP Download Failed         : 0
        Configuration Attempted        : 3
          Configuration Successful     : 0
          Configuration Failed(Parsing): 0
          Configuration Failed(config) : 3  <-- Bug?

Scott

On Fri, Aug 5, 2011 at 8:23 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> Waiting for TAC engineer.  SR. 618628889  Should be online about an hour.
>
> Scott
>
>
> On Fri, Aug 5, 2011 at 8:19 AM, Wes Sisk <wsisk at cisco.com> wrote:
>
>> **
>> Reset usually removes existing downloaded config then re-applies new
>> config from scratch.  Something unexpected is going on in your environment.
>> Most likely, yes, a bug.  Time for TAC case.
>>
>> Regards,
>> Wes
>>
>>
>> On 8/5/2011 9:59 AM, Scott Voll wrote:
>>
>>
>> Why would a reset on the CM (or apply) remove the
>>
>>  dial-peer 9994 voice pots
>> service mgcpapp <--
>> port 4 <--
>>
>> this then causes the port not to register.  is this a bug?
>>
>>  TIA
>>
>>  Scott
>>
>>
>> _______________________________________________
>> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110805/a70d35f2/attachment.html>