[cisco-voip] CM reset removes service mgcpapp

[Wes Sisk]

The config generated by CM should include creating the dial-peer.
Troubleshooting:
* download the config file from CM manually. review contents. does it 
include the dial-peer? If yes then router parsing/applying issue. If no 
then CM config generation issue.
* Config file is generated by TFTP service on CM.  restart tftp. problem 
still happen? reproducible= more likely to find a bug.  TFTP reads local 
database to generate config file.  Is db replication working in the 
cluster?  If replication working then either contents of the database 
are wrong (ccmadmin input issue?) or CTFTP is interpreting the 
information from database incorrectly.

Regards,
Wes

On 8/5/2011 11:24 AM, Scott Voll wrote:
> Configuration Auto-Download Information
> =======================================
>  No configurations downloaded
> Current state: Waiting for commands
> Configuration Download statistics:
>         Download Attempted             : 10
>           Download Successful          : 10
>           Download Failed              : 0
>           TFTP Download Failed         : 0
>         Configuration Attempted        : 3
>           Configuration Successful     : 0
>           Configuration Failed(Parsing): 0
> Configuration Failed(config) : 3 <-- Bug?
>
> Scott
>
> On Fri, Aug 5, 2011 at 8:23 AM, Scott Voll <svoll.voip at gmail.com 
> <mailto:svoll.voip at gmail.com>> wrote:
>
>     Waiting for TAC engineer.  SR. 618628889  Should be online about
>     an hour.
>
>     Scott
>
>
>     On Fri, Aug 5, 2011 at 8:19 AM, Wes Sisk <wsisk at cisco.com
>     <mailto:wsisk at cisco.com>> wrote:
>
>         Reset usually removes existing downloaded config then
>         re-applies new config from scratch.  Something unexpected is
>         going on in your environment.  Most likely, yes, a bug.  Time
>         for TAC case.
>
>         Regards,
>         Wes
>
>
>         On 8/5/2011 9:59 AM, Scott Voll wrote:
>>
>>         Why would a reset on the CM (or apply) remove the
>>
>>         dial-peer 9994 voice pots
>>         service mgcpapp <--
>>         port 4 <--
>>
>>         this then causes the port not to register.  is this a bug?
>>
>>         TIA
>>
>>         Scott
>>
>>
>>         _______________________________________________
>>         cisco-voip mailing list
>>         cisco-voip at puck.nether.net  <mailto:cisco-voip at puck.nether.net>
>>         https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110805/9c400bd9/attachment.html>