[cisco-voip] isr/cue and DTMF issues

[sam singapore]

Hi,

This is my incoming dial-peer

no dial-peer voice 44 voip
dial-peer voice 44 voip
 translation-profile incoming INIVR
 incoming called-number .T
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 dtmf-relay rtp-nte
 no vad

Tried a few other combinations also:

dial-peer voice 44 voip
 translation-profile incoming INIVR
 incoming called-number .T
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 dtmf-relay rtp-nte
 codec g711ulaw !! codec line added
 no vad

dial-peer voice 44 voip
 translation-profile incoming INIVR
 incoming called-number .T
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 session protocol sipv2
  session target ipv4:10.150.0.2
 dtmf-relay rtp-nte
 codec g711ulaw
 no vad



dial-peer voice 44 voip
 translation-profile incoming INIVR
 incoming called-number .T
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 session protocol sipv2
  session target ipv4:10.150.0.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad


DID provider is voip.ms


The call is picked up and via translation-profile INIVR, gets routed to the
autoattendant. Autoattendant responds, but fails to recognize the 0 for
operator or any other number i put in there.

How do I troubleshoot  and see if it is getting the numbers pressed or not.


Thanks
Sam.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110809/85e15ee9/attachment.html>