[cisco-voip] MGCP FXS port for Fax Line
SouthEast Texas Telecom
SETXTELECOM at att.net
Thu Aug 11 11:32:15 EDT 2011
AHHH could we PLEASE edit (AKA CUT and DELETE LENGTH) down replies?? Didn't
need to see the ENTIRE Digest in a reply (again)....
Thank you!
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Birni Tkachuk
Sent: Thursday, August 11, 2011 9:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MGCP FXS port for Fax Line
We use MGCP - FXS ports for fax at our location. We configure our gateway
with disabled Cisco and T38 fax relay and enable modem passthrough. The
port direction is programmed for "bothway". The fax machine itself could be
the problem. Ensure it is set for 2 rings and ensure distinct ring setting
is turned off. Turn off or disable ECM and you may want to slow down the
transmission speed to 9600 bps.
Birni Tkachuk
Telephony Specialist, Network Services
Department of Information Services
P 780.471.7532 F 780.491.3083
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Wednesday, August 10, 2011 3:34 PM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 94, Issue 11
Send cisco-voip mailing list submissions to
cisco-voip at puck.nether.net
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-request at puck.nether.net
You can reach the person managing the list at
cisco-voip-owner at puck.nether.net
When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."
Today's Topics:
1. help: TNT issue (Robert Knapp)
2. Brightness issue with SCCP 9.2.1 and 9.0.3 on 7970
(Robert Kulagowski)
3. MGCP FXS port for Fax Line (Scott Sinclair)
4. CUCM 8.5 + Avaya PBX integrated with Unity Connection 8.5
(Steve Gustafson)
5. Re: Brightness issue with SCCP 9.2.1 and 9.0.3 on 7970
(Florian Kroessbacher)
6. Contact Center Question (Ahmed Abd EL-Rahman)
7. Re: Contact Center Question (Matthew Saskin)
8. help TNT calls not being accepted by PSTN (Robert Knapp)
----------------------------------------------------------------------
Message: 1
Date: Wed, 10 Aug 2011 11:37:07 -0500
From: Robert Knapp <robert.knapp at spanlink.com>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] help: TNT issue
Message-ID:
<FD53377FC865FB4F96819A81CC482A1CB371657B7E at SPLKEXCH07.spanlink.com>
Content-Type: text/plain; charset="us-ascii"
Customer added new DNIS for DR site, TNT is in production receiving 30,000
calls a day. After adding 30 new DNIS, the telco says that the *8 is not
being received. Can see the *8 in the VG but telco only received 8 plus an
11 digit number. Any quick tips on how to get the * from being dropped?
Thanks,
Robert Knapp
Unified Communications Engineer
605 Hwy. 169 N., Suite. 900
Minneapolis, MN 55441
T: 763.971.2324 (Single Number Reach!)
robert.knapp at spanlink.com|<mailto:robert.knapp at spanlink.com%7C>
www.spanlink.com<http://www.spanlink.com/>
Spanlink Communications
We make it work.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/84b63394/
attachment-0001.html>
------------------------------
Message: 2
Date: Wed, 10 Aug 2011 13:16:33 -0500
From: Robert Kulagowski <rkulagow at gmail.com>
To: Cisco VOIP <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Brightness issue with SCCP 9.2.1 and 9.0.3 on
7970
Message-ID:
<CAGe0w3TiojRaeSNHYuMBDjU1GUMUUZ3cK4=GvFk5gp20aeNU+g at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
With 8.5.2, our 7970 phones set for max brightness on a switch capable of
providing 15.4 watts are full brightness.
Installing anything in the 9.0 train makes them fully dim! To get max
brightness the user actually has to "back off" one step on the phone
brightness menu. That's not going to work over 1000's of phones.
Putting 8.5.2 back on them makes them fully bright again.
Wes, TAC SR 618538977, which has been open since 2011-07-27 and going back
and forth on inanity.
------------------------------
Message: 3
Date: Wed, 10 Aug 2011 13:23:42 -0500
From: Scott Sinclair <SSinclair at gsmc.org>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] MGCP FXS port for Fax Line
Message-ID:
<654634DFE01EDD4D88DAD839035B5FC1145A42DD32 at GSMCMX.corp.gsmc.org>
Content-Type: text/plain; charset="us-ascii"
We are having problems with a FXS port set up for fax line. Fax machine
doesnt connect or hangs up when it does connect. We are on CM 6.1.3...
Any suggestions ?
Scott Sinclair
Telecom Manager
GSHS - ASO
903-315-1195 Voice
903-315-5195 VoIP
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/06ad3d72/
attachment-0001.html>
------------------------------
Message: 4
Date: Wed, 10 Aug 2011 11:23:51 -0700
From: Steve Gustafson <smgustafson at gmail.com>
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM 8.5 + Avaya PBX integrated with Unity
Connection 8.5
Message-ID:
<CAF8MFFQabXjTTPo6XEWzwum3LHW0__Ee+9mF3SP-br44kOK1AA at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hello All,
I have a CUCM 8.5 cluster and Avaya PBX integrated with Q.Sig T1s. I have a
Unity Connection 8.5 VM cluster that will initially have all users from
Avaya migrate their voicemail boxes to it prior to going to cisco IP Phones
due to their old Intuity is failing. Do I need dual switch integration or
can I send MWI from Connection through CUCM to the Avaya PBX phones via the
existing QSIG integration between CUCM and Avaya. I'm trying to minimize any
dual switch complexity and splitting VM ports between dual switch
integrations.
Thanks a lot,
Steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/cb92ca02/
attachment-0001.html>
------------------------------
Message: 5
Date: Wed, 10 Aug 2011 20:37:38 +0200
From: Florian Kroessbacher <florian.kroessbacher at gmail.com>
To: Robert Kulagowski <rkulagow at gmail.com>
Cc: Cisco VOIP <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Brightness issue with SCCP 9.2.1 and 9.0.3
on 7970
Message-ID:
<CAFTaN40uugz2PoX-xr29-yX5sjy98nrxtp8erFW0HQoXgpidrA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Nic to here that the is a TAC opened.At our Customers at which we have
installed a PoE Switch now said the same thing. The Brightness is gone. With
Power Supply on the Phone it's normal
2011/8/10 Robert Kulagowski <rkulagow at gmail.com>
> With 8.5.2, our 7970 phones set for max brightness on a switch capable
> of providing 15.4 watts are full brightness.
>
> Installing anything in the 9.0 train makes them fully dim! To get max
> brightness the user actually has to "back off" one step on the phone
> brightness menu. That's not going to work over 1000's of phones.
> Putting 8.5.2 back on them makes them fully bright again.
>
> Wes, TAC SR 618538977, which has been open since 2011-07-27 and going
> back and forth on inanity.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
--
Florian Kroessbacher
gmail: florian.kroessbacher at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/5a2e9671/
attachment-0001.html>
------------------------------
Message: 6
Date: Mon, 8 Aug 2011 00:55:16 +0200
From: "Ahmed Abd EL-Rahman" <Ahmed.Rahman at bmbgroup.com>
To: <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Contact Center Question
Message-ID:
<32C65C15C8CE6C4499E8A3A657D12BF7025EB1FC at eghercules.bmb.com.lb>
Content-Type: text/plain; charset="iso-8859-1"
Dear Gents,
I have a question regarding contact center, let's start with the existing
scenario:
There is a simple contact center script with multiple menu options for the
caller to choose one of them let's say, 1 ?new subscription, 2 ? complains,
....etc. suppose the following happens, a caller who need new subscription
chose option number 2 (complains) and directed to a complains agent and this
agent addressed this caller needs.
The problem is this call will be recorded in the CCX reports as option 2
(complains) call although it was actually a new registration (option 1)
which will be misleading in the CCX reports.
So briefly the customer needs something to be configured to facilitate the
agents to indicate that the previous call was belonging to another submenu
(option) after he finished talking with the caller in order to give accurate
statistics in the CCX reports
So please could you tell me how this can be implemented.
Best Regards
Eng. Ahmed Abd EL-Rahman I Senior Network Engineer
CCVP, CCNP, CCNA, CCNA-VOICE, IPTX, UCCX, CRMCS, WLSS
<http://www.bmbgroup.com/>
Lebanon I Egypt I Algeria I KSA I Libya I Jordan
24 x 7 Support Hotline: +966 1 200 5778 | Support Email:
sa_support at bmbgroup.com <mailto:sa_support at bmbgroup.com>
Shahd Investment Center Office #6 I Emam Saud Bin Abdulaziz Rd I Olaya, Hay
al Murooj I P.O Box 17384 I Riyadh, Saudi Arabia I Tel: +966 1 2005813 I
Fax: +966 1 2005811 I Mobile: +966 507920925 I www.bmbgroup.com
<http://www.bmbgroup.com/>
P Save a tree. Don't print this e-mail unless it's really necessary
************************************************************
Disclaimer: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information. Any
unauthorized review, use, disclosure or distribution is prohibited. If you
are not the intended recipient, please contact the sender by reply email and
destroy all copies of the original message.
************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110808/f6228322/
attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2384 bytes
Desc: image001.jpg
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110808/f6228322/
attachment-0001.jpg>
------------------------------
Message: 7
Date: Wed, 10 Aug 2011 17:11:39 -0400
From: Matthew Saskin <msaskin at gmail.com>
To: Ahmed Abd EL-Rahman <Ahmed.Rahman at bmbgroup.com>
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Contact Center Question
Message-ID:
<CAMSV-mv7bnx44JR4p5EXD0s+ixQLoUipdPTWKsdnX2WsS9a9mQ at mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
Ahmed -
Look into the "wrap code" feature within UCCX. Instead of classifying and
reporting on calls based on IVR selections agents can classify a call after
it has occurred for reporting purposes.
Matthew Saskin
msaskin at gmail.com
203-253-9571
On Sun, Aug 7, 2011 at 6:55 PM, Ahmed Abd EL-Rahman <
Ahmed.Rahman at bmbgroup.com> wrote:
> Dear Gents,****
>
> I have a question regarding contact center, let?s start with the
> existing
> scenario:****
>
> There is a simple contact center script with multiple menu options for
> the caller to choose one of them let?s say, 1 ?new subscription, 2
> ?complains, ?.etc. suppose the following happens, a caller who need
> new subscription chose option number 2 (complains) and directed to a
> complains agent and this agent addressed this caller needs.****
>
> ** **
>
> The problem is this call will be recorded in the CCX reports as option
> 2
> (complains) call although it was actually a new registration (option
> 1) which will be misleading in the CCX reports.****
>
> ** **
>
> So briefly the customer needs something to be configured to facilitate
> the agents to indicate that the previous call was belonging to another
> submenu
> (option) after he finished talking with the caller in order to give
> accurate statistics in the CCX reports ****
>
> ** **
>
> So please could you tell me how this can be implemented.****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> Best Regards****
>
> ** **
>
> *Eng. Ahmed Abd EL-Rahman** **I** **Senior Network Engineer ***
>
> *CCVP, CCNP, CCNA, CCNA-VOICE, IPTX, UCCX, CRMCS, WLSS***
>
> [image: Description: Description:
> cid:image001.jpg at 01C99801.5B760420]<http://www.bmbgroup.com/>
> ****
>
> * Lebanon I Egypt I Algeria I KSA I Libya I Jordan***
>
> *
> **24 x 7* Support Hotline: +966 1 200 5778 | Support Email:
> sa_support at bmbgroup.com****
>
> Shahd Investment Center Office #6 *I *Emam Saud Bin Abdulaziz Rd* **I*
> Olaya, Hay al Murooj* I** *P.O Box 17384* **I* Riyadh, Saudi Arabia*
> **I** *Tel: +966
> 1 2005813* *I Fax: +966 1 2005811 *I *Mobile: +966 507920925 *I** **
> www.bmbgroup.com*
>
> *P** ** * Save a tree. Don't print this e-mail unless it's really
> necessary****
>
> *************************************************************
> Disclaimer: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is
> prohibited. If you are not the intended recipient, please contact the
> sender by reply email and destroy all copies of the original message.
> ***************************************************************
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/1d6781dc/
attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2384 bytes
Desc: not available
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/1d6781dc/
attachment-0001.jpg>
------------------------------
Message: 8
Date: Wed, 10 Aug 2011 16:33:29 -0500
From: Robert Knapp <robert.knapp at spanlink.com>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] help TNT calls not being accepted by PSTN
Message-ID:
<FD53377FC865FB4F96819A81CC482A1CB371657C72 at SPLKEXCH07.spanlink.com>
Content-Type: text/plain; charset="us-ascii"
Problem description:
During a TNT call *8 is presented followed by 11 digits and # Telco is
saying, "everythings fine... on their end" we all heard that before... and
They are seeing 8 and not the *, which doesn't allow for TNT, need both.
Included logs from troubleshooting and sh runs. I have been working with
aussie tac folks as troubleshooting occurs during afterhours. We haven't
had much success. If anyone has a suggestion, please share.
. No outgoing dial-peer is required
No CUCM involved
Successful call
the TNT for the call outpulses to *8,,,,,,,,,,,,,,1XXXXXXXXXX#. This fails
- the caller experience is to hear a beep, followed by more beeps (as if
someone were pressing buttons on a phone, but I think the call cannot exit
the gateway and the pulse tones are played on the phone like AAR routing),
see cause code 16, no circuit
Failed Call
the TNT for the call outpulses to *8,,,,,,,,,,,,,,1XXXXXXXXXX#. This works
- the call gets to the other site and goes into CVP from that other gateway.
callflow if: pstn-->ingress gw-->gk-->cvp--ICM; ICM initiates TNT; back
through CVP to ingress gw to PSTN to remote site.
The label is *8,,,,,,,,,,,,,,1xxxxxxxxxx#
I tried using an outbound dial-peer with *8XXXXXX, etc with forward all, no
luck DNIS in CVP, wav's too.
The telco says that they don't see the *, so they are receiving
81XXXXXXXXXX# The weird thing about this is that all the production calls
use the same label format as these calls I'm having a problem with.
The TNT numbers are functional and calls can be placed on them to the DR
site, just not from ingress gateway.
Thanks for reading this.
Sh run s
TEMRT24#sh run
Building configuration...
Current configuration : 22796 bytes
!
! Last configuration change at 22:08:23 EDT Tue Aug 9 2011 by spanlink !
NVRAM config last updated at 14:01:58 EDT Tue Jul 26 2011 by ciscoworks2k !
version 12.4
service timestamps debug datetime msec localtime service timestamps log
datetime msec localtime service password-encryption service sequence-numbers
!
hostname TEMRT24
!
boot-start-marker
boot system flash:c5350-ik9s-mz.124-15.T10.bin
boot system flash:c5350-is-mz.124-6.XT2.bin boot system
flash:c5350-is-mz_nestle no boot startup-test boot-end-marker !
no logging queue-limit
logging buffered 2000000
no logging rate-limit
no logging console
no logging monitor
!
!
!
resource-pool disable
aaa new-model
!
!
aaa authentication login default group tacacs+ line aaa authentication
enable default group tacacs+ enable aaa authorization exec default group
tacacs+ none aaa accounting exec default start-stop group tacacs+ aaa
accounting commands 1 default start-stop group tacacs+ aaa accounting
commands 15 default start-stop group tacacs+ aaa accounting network default
start-stop group tacacs+ !
!
aaa session-id common
clock timezone EST -5
clock summer-time EDT recurring
spe default-firmware spe-firmware-1
!
!
ip cef
ip domain name perriergroup.com
ip host cvpvxml 170.196.150.161
ip host media-srv 170.196.114.161
ip host media-srv-backup 170.196.111.137 ip host media-wav 170.196.114.161
ip host media-wav-backup 170.196.111.137 ip host asr-en-us 170.196.114.138
ip name-server 170.196.112.77 ip name-server 170.196.11.77 !
!
multilink bundle-name authenticated
isdn switch-type primary-4ess
isdn voice-call-failure 0
!
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through
g711ulaw
h323
!
!
!
!
!
!
!
!
voice iec syslog
!
voice translation-rule 1
rule 1 /987654/ //
!
voice translation-rule 2
rule 1 /^.*/ /14692557597/
!
voice translation-rule 3
rule 1 /^21#/ //
!
!
voice translation-profile StripTechPrefix translate called 3 !
voice translation-profile TestCall
translate called 2
!
voice translation-profile block
translate called 1
!
!
ivr prompt memory 15000
ivr prompt streamed none
ivr asr-server rtsp://asr-en-us:554/media/speechrecognizer
!
application
service new-call flash:bootstrap.vxml
paramspace english language en
paramspace english index 0
paramspace english location flash:
paramspace english prefix en
!
service nwna_ivr flash:bootstrap.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash:
paramspace english prefix en
!
service handoff flash:handoff.tcl
paramspace english language en
paramspace english index 0
paramspace english location flash:
paramspace english prefix en
!
session
start serv nwna_ivr
!
!
mrcp client timeout connect 19
mrcp client timeout message 19
mrcp client rtpsetup enable
vxml tree memory 100000
http client cache memory pool 80000
http client cache memory file 1400
http client cache refresh 86400
http client connection timeout 10
http client response timeout 20
!
fax interface-type fax-mail
!
!
dial-control-mib retain-timer 6
dial-control-mib max-size 228
!
!
trunk group group
!
!
trunk group 1
max-calls data 0
!
!
trunk group 0
max-calls data 0
!
archive
log config
hidekeys
!
!
!
!
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d primary nfas_int 0 nfas_group 1 description
NP838621001001 - 14/HCGS/353152 !
controller T1 3/1
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d backup nfas_int 1 nfas_group 1 description
NP838622001001 - 14/HCGS/353165 !
controller T1 3/2
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 2 nfas_group 1 description
NP838623001001 - 14/HCGS/353151 !
controller T1 3/3
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 3 nfas_group 1 description
NP838624001001 - 14/HCGS/353169 !
controller T1 3/4
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 4 nfas_group 1 description
NP838625001001 - 14/HCGS/353166 !
controller T1 3/5
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 5 nfas_group 1 description
NP838626001001 - 14/HCGS/353179 !
controller T1 3/6
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 6 nfas_group 1 description
NP838627001001 - 14/HCGS/353187 !
controller T1 3/7
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 7 nfas_group 1 description
NP838628001001 - 14/HCGS/353174 !
!
translation-rule 100
Rule 1 .... 21
!
!
translation-rule 200
Rule 2 9915 209915
Rule 3 9908 209908
Rule 4 9909 209909
Rule 5 9910 209910
Rule 6 9911 209911
Rule 7 9912 209912
Rule 8 9913 209913
Rule 9 9914 209914
!
!
!
!
interface GigabitEthernet0/0
ip address 170.196.114.73 255.255.255.0
no ip redirects
no ip mroute-cache
duplex full
speed 100
negotiation auto
keepalive 1800
h323-gateway voip interface
h323-gateway voip id VXMLtem ipaddr 170.196.114.192 1719 h323-gateway voip
h323-id TEMvg73 h323-gateway voip tech-prefix 21# h323-gateway voip bind
srcaddr 170.196.114.73 !
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
negotiation auto
!
interface Serial0/0
no ip address
shutdown
clock rate 2000000
!
interface Serial3/0
no ip address
shutdown
!
interface Serial0/1
no ip address
shutdown
clock rate 2000000
!
interface Serial3/0:23
no ip address
encapsulation hdlc
trunk-group group 1
isdn switch-type primary-4ess
isdn incoming-voice modem
no cdp enable
!
!
!
voice-port 3/0:D
output attenuation 11
no echo-cancel enable
no non-linear
no vad
playout-delay nominal 200
playout-delay minimum high
playout-delay mode fixed
!
!
dial-peer cor custom
!
!
!
dial-peer voice 888 voip
translation-profile incoming block
destination-pattern ....
translate-outgoing called 100
session target ras
tech-prefix 88#
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 889 voip
translation-profile incoming block
preference 1
destination-pattern ....
translate-outgoing called 100
session target ras
tech-prefix 89#
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 10 pots
incoming called-number .
direct-inward-dial
port 3/0:D
!
dial-peer voice 987654 voip
translation-profile incoming block
incoming called-number 987654
!
dial-peer voice 885 voip
translation-profile incoming block
destination-pattern 990[8-9]
translate-outgoing called 200
session target ras
tech-prefix 85#
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 6666 voip
translation-profile incoming StripTechPrefix service nwna_ivr max-conn 30
session target ras incoming called-number 21#8005555555.....
dtmf-relay rtp-nte h245-signal h245-alphanumeric codec g711ulaw no vad !
dial-peer voice 886 voip
translation-profile incoming block
destination-pattern 991[0-5]
translate-outgoing called 200
session target ras
tech-prefix 85#
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
!
gateway
!
!
ss7 mtp2-variant Bellcore 0
ss7 mtp2-variant Bellcore 1
ss7 mtp2-variant Bellcore 2
ss7 mtp2-variant Bellcore 3
banner motd ^CC
!
scheduler allocate 10000 400
process cpu threshold type total rising 90 interval 60 falling 50 interval
15 ntp clock-period 17179955 ntp server 170.196.113.250 end
2nd VG
!
version 12.4
no service pad
service timestamps debug datetime msec localtime service timestamps log
datetime msec localtime service password-encryption service sequence-numbers
!
hostname TADRT21
!
boot-start-marker
boot system flash:c5350-ik9s-mz.124-15.T10.bin
boot system flash:c5350-is-mz.124-6.XT2.bin boot system
flash:c5350-is-mz_nestle no boot startup-test boot-end-marker !
no logging queue-limit
logging buffered 5000000
no logging rate-limit
enable secret 5 XX
!
!
!
resource-pool disable
no aaa new-model
clock timezone EST -5
clock summer-time EDT recurring
tdm clock priority 1 3/0
spe default-firmware spe-firmware-1
!
!
ip cef
ip domain name perriergroup.com
ip host gps-usa1b 10.1.1.1
ip host cvpvxml 170.196.150.161
ip host media-srv 170.196.111.137
ip host media-srv-backup 170.196.114.161 ip host media-wav 170.196.111.137
ip host media-wav-backup 170.196.114.161 ip host asr-en-us 170.196.111.128
ip name-server 10.1.1.1 ip name-server 170.196.112.77 ip name-server
170.196.11.77 !
!
multilink bundle-name authenticated
isdn switch-type primary-4ess
isdn voice-call-failure 0
!
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through
g711ulaw
h323
!
!
!
!
!
!
!
!
voice iec syslog
!
voice translation-rule 1
rule 1 /987654/ //
!
voice translation-rule 2
rule 1 /^.*/ /14692557597/
!
voice translation-rule 3
rule 1 /^22#/ //
!
!
voice translation-profile StripTechPrefix translate called 3 !
voice translation-profile TestCall
translate called 2
!
voice translation-profile block
translate called 1
!
!
ivr prompt memory 15000
ivr prompt streamed none
ivr asr-server rtsp://asr-en-us:554/media/speechrecognizer
!
application
service new-call flash:bootstrap.vxml
paramspace english language en
paramspace english index 0
paramspace english location flash:
paramspace english prefix en
!
service nwna_ivr flash:bootstrap.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash:
paramspace english prefix en
!
service handoff flash:handoff.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash:
paramspace english prefix en
!
session
start serv nwna_ivr
!
!
mrcp client timeout connect 19
mrcp client timeout message 19
mrcp client rtpsetup enable
vxml tree memory 100000
http client cache memory pool 80000
http client cache memory file 1400
http client cache refresh 86400
http client connection timeout 10
http client response timeout 20
!
fax interface-type fax-mail
!
!
dial-control-mib retain-timer 6
dial-control-mib max-size 228
!
!
trunk group 1
max-calls data 0
!
!
trunk group group
!
!
trunk group 0
max-calls data 0
!
username all
archive
log config
hidekeys
!
!
!
!
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d primary nfas_int 0 nfas_group 1 description
IBBHWY4W0001 - 0024 - NP8386290001 - 14/HCGS/353150 !
controller T1 3/1
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d backup nfas_int 1 nfas_group 1 description
IBBHWY4W0025 - 0048 - NP8386300001 - 14/HCGS/353168 !
controller T1 3/2
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 2 nfas_group 1 description
IBBHWY4W0049 - 0072 - NP8386310001 - 14/HCGS/353154 !
controller T1 3/3
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 3 nfas_group 1 description
IBBHWY4W0073 - 0096 - NP8386320001 - 14/HCGS/353170 !
controller T1 3/4
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 4 nfas_group 1 description
IBBHWY4W0097 - 0120 - NP8386330001 - 14/HCGS/353149 !
controller T1 3/5
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 5 nfas_group 1 description
IBBHWY4W0121 - 0144 - NP8386340001 - 14/HCGS/353159 !
controller T1 3/6
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 6 nfas_group 1 description
IBBHWY4W0145 - 0168 - NP8386350001 - 14/HCGS/353167 !
controller T1 3/7
framing esf
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 7 nfas_group 1 description
IBBHWY4W0169 - 0192 - NP8 14/HCGS/353171 !
!
translation-rule 100
Rule 1 .... 22
!
!
!
!
interface GigabitEthernet0/0
description TADSWA02 Fa0/23
ip address 170.196.111.190 255.255.255.0 no ip redirects no ip route-cache
cef no ip route-cache no ip mroute-cache duplex full speed 100 negotiation
auto h323-gateway voip interface h323-gateway voip id VXMLphx ipaddr
170.196.111.139 1719 h323-gateway voip h323-id PHXvg190 h323-gateway voip
tech-prefix 22# h323-gateway voip bind srcaddr 170.196.111.190 !
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
negotiation auto
!
interface Serial0/0
no ip address
shutdown
clock rate 2000000
no fair-queue
!
interface Serial3/0
no ip address
shutdown
!
interface Serial0/1
no ip address
shutdown
clock rate 2000000
!
interface Serial3/0:23
no ip address
encapsulation hdlc
trunk-group group 1
isdn switch-type primary-4ess
isdn incoming-voice modem
no cdp enable
!
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 170.196.111.250 ip route 10.1.1.1 255.255.255.255
132.1.1.1 no ip http server no ip http secure-server !
!
!
!
!
voice-port 3/0:D
output attenuation 11
no echo-cancel enable
no non-linear
no vad
playout-delay nominal 200
playout-delay minimum high
playout-delay mode fixed
!
!
dial-peer cor custom
!
!
!
dial-peer voice 987654 voip
translation-profile incoming block
incoming called-number 987654
!
dial-peer voice 888 voip
translation-profile incoming block
destination-pattern ....
progress_ind setup enable 3
progress_ind progress enable 8
translate-outgoing called 100
session target ras
tech-prefix 89#
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 889 voip
translation-profile incoming block
preference 1
destination-pattern ....
translate-outgoing called 100
session target ras
tech-prefix 88#
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 10 pots
incoming called-number .
direct-inward-dial
port 3/0:D
!
dial-peer voice 6666 voip
translation-profile incoming StripTechPrefix service nwna_ivr max-conn 30
session target ras incoming called-number 22#8005555555.....
dtmf-relay rtp-nte h245-signal h245-alphanumeric codec g711ulaw no vad !
!
gateway
timer receive-rtp 1200
!
!
ss7 mtp2-variant Bellcore 0
ss7 mtp2-variant Bellcore 1
ss7 mtp2-variant Bellcore 2
ss7 mtp2-variant Bellcore 3
****************************************************************************
*****************
Test call log
8-9 troubleshooting
9:59 fail
10:00 fail
10:01 fail
10:02 fail
10:03 fail
10:04 pass dnis 2820
10:06 fail
10:07 fail
10:08 fail
10:09 pass dnis 2821
10:10 FAIL
10:11 pass dnis 2820
10:12 pass dnis 2820
10:13 fail
Calling 7639712287
Called 180009509396 typically shows as dnis 6130
Attempting to use take back and transfer to place calls on DR site gateway
debugs used:
debug isdn q931
debug cch323 h225
debug voip ccapi inout
debug cch323 h245
debug h225 asn1
debug h225 asn1
Thanks,
Robert Knapp
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/2d4f5c9a/
attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CVP.2011-06-07.00.log
Type: application/octet-stream
Size: 1538208 bytes
Desc: CVP.2011-06-07.00.log
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/2d4f5c9a/
attachment.obj>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: TNTproblemcall-CVPvblog.txt
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/2d4f5c9a/
attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 8-9_logs_TADRT21.txt
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/2d4f5c9a/
attachment-0001.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 8-9_logs_TEMRT21.txt
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20110810/2d4f5c9a/
attachment-0002.txt>
------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 94, Issue 11
******************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list