[cisco-voip] UCCX HA expectations

[Paul]

How's the performance on Finesse?


________________________________
From: Dennis Heim <Dennis.Heim at cdw.com>
To: Daniel <dan.voip at danofive.id.au>
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: Saturday, August 20, 2011 5:32 PM
Subject: Re: [cisco-voip] UCCX HA expectations


 
CAD failover is always 2 minutes. CTI-OS with CCE is much more resilant.
 
Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

317.569.4255 Single Number Reach
317.569.4201 Fax
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/
 
From:Daniel [mailto:dan.voip at danofive.id.au] 
Sent: Saturday, August 20, 2011 5:21 PM
To: Dennis Heim
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] UCCX HA expectations
 
Could you explain this a bit more please?
 
Are you saying that with CCX and CAD the failover time is 2min+ but with CCE its not?
 
CCX and CAD failover 2min+
 
CCE and CTI-OS agent soft phone is faster?
 
 
On Sat, Aug 20, 2011 at 2:40 PM, Dennis Heim <Dennis.Heim at cdw.com> wrote:
That is pretty much CAD, failover time is pretty long. Within the CCE folks where they have the option of CTI-OS, this is one of the reasons they recommend against cad is the 2 minute+ failover time.
 
Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

317.569.4255 Single Number Reach
317.569.4201 Fax
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/
 
From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Daniel
Sent: Friday, August 19, 2011 5:16 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] UCCX HA expectations
 
Hi All,
 
We're currently testing HA on two new UCCX 8.5.1 boxes. If we pull the network cable out of the primary server the desktop CAD takes more than 3 minutes to recognise this outage and connects to the secondary. During this time of between 3 - 5 minutes the CAD is completely unresponsive, it eventually connects to the secondary and all is good. Also while the primary is down if you start CAD fresh and login it also takes some time. Once we put the network cable back in the fallback to the primary on CAD is instant.
 
Are these normal results? is this expected?
 
thanks,
 
Daniel
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110820/7da9f1e7/attachment.html>