[cisco-voip] Strange Problem with Cisco Phone power

[AbdusSaboor Khan]

Thanks Erich, the problem is Phone is powering down, if it loses the
connection would different, how you check it is energy wise setup?


Here is the log on switch:
d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/21,
changed state to down
6d10h: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to down
6d10h: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/21, port set to untrusted.
6d10h: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to up
6d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/21,
changed state to up
6d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20,
changed state to down
6d10h: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to down
6d10h: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/20, port set to untrusted.
6d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11,
changed state to down
6d10h: %LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to down
6d10h: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up
6d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20,
changed state to up
6d10h: %LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to up
6d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11,
changed state to up
6d10h: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/11, port set to untrusted.
6d10h: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/21, port trust enabled.
6d10h: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/20, port trust enabled.
6d10h: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/11, port trust enabled.
6d11h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to down
6d11h: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to down
6d11h: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to up
6d11h: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/18, port set to untrusted.
6d11h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to up
6d11h: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/18, port trust enabled.
6d12h: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/18, port set to untrusted.
6d12h: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/18, port trust enabled.
6d12h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to down
6d12h: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to down
6d12h: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/18, port set to untrusted.
6d12h: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to up
6d12h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to up
6d12h: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/18, port trust enabled.
1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to down
1w0d: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to down
1w0d: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to up
1w0d: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/18, port set to untrusted.
1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to up
1w0d: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/18, port trust enabled.
1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to down
1w0d: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to down
1w0d: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on
port Fa0/18, port set to untrusted.
1w0d: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to up
1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18,
changed state to up
1w0d: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port
Fa0/18, port trust enabled.


Regards,

Abdul



On Wed, Aug 24, 2011 at 7:32 AM, Erich Novak <Erich.Novak at nts.eu> wrote:

>  Hi,****
>
> ** **
>
> maybe you’re hitting this bug :
> http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn08126
> ****
>
> it’s fixed in 9.2(1)****
>
> ** **
>
> or do you want to use energywise to power down the phones when you
> unplug/shutdown your computer ?****
>
> ** **
>
> ** **
>
> brgds****
>
> Erich****
>
> ** **
>
> *Von:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *Im Auftrag von *AbdusSaboor Khan
> *Gesendet:* Mittwoch, 24. August 2011 03:29
> *An:* Cisco VoIP List
> *Betreff:* [cisco-voip] Strange Problem with Cisco Phone power****
>
> ** **
>
> Hi Team,****
>
>  ****
>
> I have very strange problem , the laptops or computer attached to Cisco
> Phones mostly 7962, when it shutting down it can power down the Cisco phone
> too, any one goes through with this.****
>
>  ****
>
> Swicth 3560V2 POE,****
>
> Cisco 7962****
>
>  ****
>
>  ****
>
> Regards,****
>
>  ****
>
> A Saboor****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110824/0b65b5fe/attachment.html>