[cisco-voip] Getting Secondary Dial-tone when dialing a translation

[Paul]

what's your access code configured as?

when does the secondary dialtone occur?


________________________________
From: Mike King <me at mpking.com>
To: Cisco VoIPoE List <cisco-voip at puck.nether.net>
Sent: Thursday, August 25, 2011 1:14 PM
Subject: [cisco-voip] Getting Secondary Dial-tone when dialing a translation


So I made a new translation 523501 translates to 559100.

I have extensions defined in 527XXX.

When I dial 5235 I get a secondary dialtone, and when I dial 01, the call completes to 559100 like I expect.

It's the secondary dialtone that is showing up that has me concerned.

Where would I look to start trouble shooting this?



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110825/b5752db0/attachment.html>