[cisco-voip] Moh-live command giving static on MoH feed

[Buchanan, James]

No, it actually functions standalone. It can do just that--it can stream all the time. I just did this a couple of months ago. 

James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions 
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com
D: 615-866-5729 | F:615-866-5781  www.presidio.com


-----Original Message-----
From: Erick B. [mailto:erickbee at gmail.com] 
Sent: Tuesday, August 30, 2011 1:51 AM
To: Buchanan, James
Cc: voip puck; Joe Slade
Subject: Re: [cisco-voip] Moh-live command giving static on MoH feed

Hmm...Sounds like it depends on Synapps server. Can it just stream audio to a multicast address all the time like the SRST MoH function does? Not much docs on their website about this yet other then the product announcement.

Thinking about maybe picking up a small fanless HTPC and running VLC on it and see if I can get that to work for MoH. Some folks on VLC forum though tried this and have timing problems with the playback.

Thanks for the info.

On Mon, Aug 29, 2011 at 4:23 PM, Buchanan, James <jbuchanan at presidio.com> wrote:
> I'd use the Syn-Apps Paging Relay for this. It has a good RCA input and converts the stream to multicast. Much better signal than the E&M port.
>
> James Buchanan| UC Technology Manager | Presidio South | Presidio 
> Networked Solutions
> 12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com
> D: 615-866-5729 | F:615-866-5781  www.presidio.com
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
> Sent: Monday, August 29, 2011 11:39 AM
> To: voip puck
> Subject: [cisco-voip] Moh-live command giving static on MoH feed
>
> Hi,
>
> Anyone ever see brief static inserted into a live multicast MoH feed on a router (CUCM environment). When we take the moh-live command out of the configuration the audio file on the router plays fine. When we unplug the cable going into FXO port with the moh-live command it still does static every 2 minutes or so when the router goes and detects if there is an audio stream on FXO port.
>
> On this topic, is there a better way to do this with a UCS virtual environment (can't use the USB-MOH-AUDIO)?  I wish CUCM had a MoH Playlist you could play multiple audio files with as a audio source option.
>
> Thanks, Erick
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>