[cisco-voip] PBX help

[Bill Riley]

One way audio is usually a routing issue. Can you confirm that the
10.50.30.X device can reach the IP address of the IP phone. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brandon Kovach
Sent: Wednesday, August 31, 2011 8:31 AM
To: voip
Subject: [cisco-voip] PBX help

Hello All,

I have attached a router to our call manager with the intentions of
integrating an existing overhead PBX into the system and have had some luck
with it.  I ended up running some FAX services through the router and that
works as it should.  The overhead paging works, halfway.  I have one way
audio.  Calls go through the call manager and to the router and to the PBX.
Though when a person answers back through the PBX, the audio never makes it
to the telephone of the originator of the call.

I have attached the text of the config.  Any help?

BK



--
Brandon Kovach
Director of Technology
Logan-Rogersville Schools

----------------------------------------------------------------
Logan Rogersville Schools,  http://www.logrog.net