[cisco-voip] IP Based Fax Servers

[Scott Voll]

Are all Fax machines going away?

if not, how will you support both T.38 and fax passthrough?

is T.38 stuff coming in on only one pri?

Currently we use right fax... my last enterprise we used Xmeduis...... I
like Xmedius much better.  just my 2 cents

Scott

On Fri, Dec 2, 2011 at 8:55 AM, Mike King <me at mpking.com> wrote:

> I'm looking to escape the support nightmare of Fax machines.  We currently
> have over 100 fax machines in our enterprise, mostly connected to VG224's,
> some on ATA's (ugh).  At least once a week I spend a few hours
> troubleshooting a faxing issue.  (All my sites use PRI's on H323 gateways
> or MGCP gateways)
>
> Based on Paper, Toner, Drums, Smartnet, and my time savings, I've got a
> real sweet story on introducing a fax server.  (It'll most likely be a
> Biscom FAXCom server because it supports direct tie in to our Enterprise
> application)
>
> They support (require?) T.38.   Should T.38 be the silver bullet and this
> should "Just Work" or am I trading one headache for another?  (Protocol
> wise, The actual fax software I can't control, and I imagine they all use
> T.38 anyways)
>
> Mike
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111202/0786f6fc/attachment.html>