[cisco-voip] Unity Connection MWI

[Pavan]

Are you integrating over sip. If so are the two unity connections configured as peers in the trunk ?

On Dec 2, 2011, at 12:59 PM, Nick <csvoip at googlemail.com> wrote:

> Yep, tried both, rebooted both servers and tried resync a few times.
> 
> On 2 December 2011 18:05, Paul <asobihoudai at yahoo.com> wrote:
> did you bounce the unity connection services and resync the MWI already?
> 
> 
> ________________________________
> From: Nick <csvoip at googlemail.com>
> To: cisco-voip at puck.nether.net
> Sent: Friday, December 2, 2011 11:01 AM
> Subject: [cisco-voip] Unity Connection MWI
> 
> 
> I have a Unity Connection Cluster 0n 8.6.1, however when I set the
> Subscriber to be the Primary server, I do not receive any MWI, messages are
> received fine, change back to the Publisher as Primary and all is fine again.
> 
> Both servers have ports set for inbound calls and MWI and all ports are in one line group
> 
> Any ideas?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip  
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111202/238ee9a2/attachment.html>