[cisco-voip] Moving to 10 digit dialing

Mark Holloway mh at markholloway.com
Tue Dec 20 12:33:15 EST 2011


For clarification, I assume this is for North America? If your area code is 213 you could create the following:

dial-peer 7 < Support 7 digit dialing
[2-9]......!

dial-peer 10 < Support 10 digit dialing in your area
213[2-9]......!

dial-peer 11 < Support North American Long Distance
1[2-9].........!


When your area switches to 10 digit and it is enforced by your telco, you could prepend 213 to the dialed digits in dial-peer 7 if needed.


On Dec 20, 2011, at 9:36 AM, Mike Hyde wrote:

> Is there a way on a CME/UC5** series system to have both 7 and 10 digit dialing?  Our area is switching to 10 digit dial next year, so we are looking at configuring the system with both till the cutover is done.
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list